FFP2 BreaSAFE® nanofiber respirator FFP2 - black | 5 pcsCode: 1940/M 1940/L Choose variant
Product detailed description
Benefits of the FFP2 BreaSAFE® nanofiber respirator FFP2 - black:
- Contains nanofiber membrane NnF - MBRANE BreaSAFE® by Pardam Nano4fibers of the European.
- Reusable - the half mask can be disinfected (min. 5 disinfection cycles).
- Nose clip for better fit on the face.
- Lightweight (only 4g).
- Unique shape for better seal.
Why can I use the FFP2 BreaSAFE® nanofiber respirator FFP2 for several days?
Internal testing has shown that the FFP2 BreaSAFE® nanofiber respirator FFP2 half mask maintains its filtration capabilities even after 5 disinfection cycles. This ability is due to the innovative nanofiber membrane NnF MBRANE - BreaSAFE®.
How to maintain the FFP2 BreaSAFE® nanofiber respirator FFP2?
After each use, we recommend applying disinfectant in the form of an aerosol spray to the outside and inside of the half mask. The respirator cannot be cleaned from dust clogging. We therefore recommend that when used in dusty environments, it should be changed after each use.
Differences between the industrial respirator and the FFP2 BreaSAFE® nanofiber respirator FFP2 before COVID-19
Many people strive to provide themselves with the most robust protection from respiratory infection. They or their loved ones are often among the immunocompromised risk groups, or are at high risk of viral illness on public transport and at work. These people choose respirators as a preventive health aid.
Industrial respirators capture the smallest particles on electrostatically charged meltblown non-woven fabric. The moisture in the breath discharges the electrostatics. Therefore, the industrial respirator loses effectiveness through the breath of the wearer. Nanofiber respirators also contain an electrostatically charged metlblown nonwoven fabric filter. However, the loss of efficiency due to moisture need not bother their users. The meltblown nonwoven filter filters out the largest contaminants, but the smallest particles of dirt, including viruses, are filtered out by the much more efficient nanofiber membrane, which is approximately 100 times denser than the meltblown nonwoven. Thus, with a nanofiber respirator, the user is getting at least two effective filters in one product at the same time.
Why don't conventional respirators address virus capture?
Industry certifications are completely irrelevant for virus protection. For example, laboratory workers in industrial certification also examine whether paraffin oil will flow through the respirator or whether dolomite dust will clog it. If you are not going to work in respirators in mines or in the most heavily polluted industrial plants, but are buying them for protection against respiratory infection, ask about virus protection certificates.
Nanofiber respirator manufacturers must test their products to the same standards, i.e. FF2 and FFP3. If a respirator contains a nanofiber membrane, it can protect its wearer from viruses just as effectively whether it has an industry label of FFP2 or FFP3.
Does the FFP2 BreaSAFE® nanofiber respirator FFP2 protect against COVID-19?
The filtering half-mask contains the NnF BreaSAFE® MBRANE nanofiber membrane, which has been tested by Nelson Labs, a global testing laboratory in the USA who officially confirmed that the nanofiber membrane captures 99.9% of viruses and bacteria (VFE and BFE tests).
- size L - 17.5 cm from the root of the nose to the end of the elastic bands, 16 cm from the root of the nose to the chin (bottom edge).
- size M - 17 cm from the root of the nose to the end of the elastic bands, 15 cm from the root of the nose to the chin (bottom edge).
About FFP2 BreaSAFE® nanofiber respirator FFP2
The FFP2 BreaSAFE® nanofiber respirator FFP2 filtering half mask is manufactured by the European company PARDAM NANO4FIBERS s.r.o., a proud member of the European Nanotechnology Industries Association and a partner in the European is Nano project. PARDAM NANO4FIBERS s.r.o. is one of the world's largest manufacturers of inorganic nanofibers. The man behind the products of PARDAM NANO4FIBERS s.r.o. is Jan Buk, an internationally recognized expert in the field of inorganic nanofibers.
rubber bands are this time a little shorter, but maybe it will loosen up a little over time
So far the best respirator I have tried. I buy repeatedly. I recommend.
I have no experience with the product yet. Only after 25.12.
I can safely recommend the respirator to everyone.
I don't know of any yet
I will not shop anywhere else. The quality of the products is excellent. I feel safe in them. Even the quality of wear is second to none. At least I haven't found better products. I just recommend!!!
The PARDAM NANO4FIBERS s.r.o. company is the world's leading producer of inorganic nanofibers and nanotechnology products. The company is a member of the Nanotechnology Industry Association of the Czech Republic and part of the project Czechia is nano.
Respirators are designed for comfortable use during demanding physical activity as well as for everyday use. They are suitable for working in a dusty environment, with organic solvents, but also for protection against allergens, viruses and bacteria.
Microorganisms, including viruses and bacteria, that get caught in the nanofiber filter will die in a short time thanks to the silver nanoparticles used. Therefore, users can use the respirator repeatedly and wait with it in health and well-being, even a possible several-week epidemic of a serious respiratory disease.
What is "COVID-19 Certification"?
In response to the new coronavirus pandemic, the European Union has issued a recommendation that regulates the way the market (especially medical and protective equipment) is supervised in relation to COVID-19. A new official certification type (alongside the FFP series) for COVID-19 has been created to test products against the new standard. As a result, users of COVID-19 certified products can be confident that the respirators are sufficiently effective against SARS-COV-2.